LAUNCH X431 X-PROG 3 Vehicle Immobilizer Programmer Key programmer tool XPROG For X431 V pro3s+ X431 V+ PAD V PAD VII xprog 3

LAUNCH X-PROG 3 Immobilizer Programmer is a kind of anti-theft product, which is a powerful chip reading and writing device. It is mainly used for reading and writing car key chip data, including EEPROM reading and writing, on-board MCU reading and writing, Benz infrared key generation, special key generation, BMW engine ins code reading, BMW cas4 + 1 FEM chip reading and writing, etc. it can be used with a variety of comprehensive diagnostic equipment, without binding, flexible，stable and reliable products. It is suitable for automobile electronic industry 1 locksmith 1 maintenance factory and other professional users.

The LAUNCH XPROG 3 also supports advanced coding/programming functions: - VW/AUDI MQB platform engine&gearbox ECU replacement or cloning (Read engine ECU data directly from the key). - ECU replacement for 4TH Generation Audi (0AW/0B5) gearboxs. - Reading, writing & cloning of the ECU for 4TH Generation VW UDS engines. - BMW E chassis 8HP gearbox ECU program wiping,.etc.

[ Compatible Car Brands & Car systems ] LAUNCH XPROG 3 Key programmer suppoorts :VW,AUDI ,SKODA,SEAT,BMW,MERCEDES BENZ,TOYOTA and more continue to be updated … Supports Systems: Engine,Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

LAUNCH X431 X prog 3 Compatible with :

1. X431 Serial : X431 V, X431 PRO3S+, X431 V+,X-431 PRO V4.0, X-431 PRO 3 V4.0,ect

Support Function: Read PIN Code, Delete anti-theft, Delete key and Matching key

2. X431 PAD Serial: X431 PAD III V2.0, X431 PAD V, X-431 PAD VII, X431 PRO 5,ect ..

Support Function : Read PIN, Delete anti-theft, Delete key, Matching key, Module replacement and Module cloning

LAUNCH X431 X PROG 3 Advantages


1. Supports For VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).


2. Supports For VW/AUDI MQB platform gearbox ECU replacement or cloning.


3. Supports ECU replacement for the fifth-generation of For Audi (0AW/0B5) gearbox.


4. Supports reading, writing & cloning the ECU for the fourth-generation of For VW UDS engine.


5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.


6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).



LAUNCH X431 XPROG 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.

2. Supported brands: For VW, For AUDI, For SKODA, For SEAT, For BMW, For MERCEDES-BENZ, For TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

LAUNCH X431 X-PROG 3 Core Functions

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.

3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

4. Supports ECU replacement for the fourth-generation of For VW/AUDI engine;

5. Supports ECU replacement for the fifth-generation of For VW/AUDI Bosch and Siemens engines.

6. Supports the all lost and replacement for the fourth generation of For AUDI EZS, comfortable ECU, and KESSY IC.

7. Supports the For BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

8. Supports the For BMW CAS4/CAS4+ module replacement.

9. Supports the ECU cloning and replacement for BMW Siemens engines.

How to use X-PROG3 to read and write data?


Method 1:

use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.


Method 2:


Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host


Method 3:


After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host


Technical specifications


Input voltage: 12 V DC

Input current: 500 mA

Working temperature: 0 to 50 ℃

Storage temperature: - 20 to 70 ℃

Dimension: 39 x 107 x 298 mm
LAUNCH X431 X prog 3 Packing List :

- Main unit
- Power adaptor
- Main diagnostic cable
- The fourth-generation data acquisition cable
- The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)

- BENCH mode cable. MCu converter V1. MCU converter V2
- Mcu cable with multiple leads. EEPROM chip adaptor
- Benz infrared analog acquisition key
- MCU cable with multiple leadsEEPROM converter

- User Manual