LAUNCH X431 PRO3S+ Plus 10.1" Car OBD2 Diagnostic Tools Automotive OBD Code Reader Scanner Active Test ECU Coding pk X431 V PRO

Active Test (Bi-directional Control)

Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.

30+ Special Reset Service Functions

LAUNCH X431 PRO3S+ scan tool gives you the ability to use dealership level relearn procedures to complete repairs/maintenance: Oil Reset,Brake Reset , ABS Bleeding, Injector coding, Gear Reset, SAS Reset, TPMS Reset, DPF Reset, Airbag Reset ,Adblue Reset ,BMS Reset, ETS Reset, AFS Reset, EGR Adaptation, GEARBOX, SUNROOF, SEAT Calibration, etc.

(NOTE:You can find 15 kinds of commonly used reset functions in the reset menu, and other special functions in the car brand diagnostic softwares menu)

1.Oil Lamp,Oil Reset Service

This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.

2.Electronic Parking Brake Reset

is important in the maintenance of electronic braking system's safety and efficiency.

3.Steering Angle Calibration

helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

4.ABS Bleeding

This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).

5.Tire Pressure Monitor System Reset

This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS replacement and sensor test.

6.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running

7.IMMO Service

it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Otherproblems with the ignition system and mechanical components also may not show an rpm loss when aninjector is turned off

9.Battery Maintenance System Reset

allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

10.Diesel Particulate Filter (DPF) Regeneration

specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

11. Electronic Throttle Position Reset

This function enables you to make initial settings to throttle actuators and returns the “learned” values stored on ECU to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.

12.Gearbox Matching

(1). This function can complete the gearbox self-learning to improve gear shifting quality.

(2). When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.

13. AFS (Adaptive Front-lighting System) Reset

This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.

14. Sunroof Initialization

This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc.

15.EGR Adaption

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

16 .AF Adjustment

17, Adblue Reset

Key Programming Function ( need works with additional model )

>>>>Add, Delete & Reprogram Keys, >>>Rewrite smart keys, All smart keys lost, Replace smart key ECU, Replace KNOB IGNITION;>>>>Reset Key: Relearn a key.

(Note:this key programming function is NOT universally compatible .please check compatibility with us if necessary. X431 PRO3S+ supports PINCode reading for most cars before 2008 ,for vehicles after 2008,you need to have PINCode to do key programming

More functions and vehicle coverage is developing and waiting you to discover ........

Thanks to the LAUNCH X-431 PRO3S+ Scan tool, you can get more repair orders and Improve your efficiency and professionalism , Having such a state-of-the-art ,Fast,Smart, Intelligent Bi-Directional Scanner, Which is a great investment in your life .

As a Car owner ,Thanks to the LAUNCH X-431 PRO3S+ pro Scan tool, you don't need to rely on the mechanics or auto repair shop , you can be the mechanic of your family ,Which is a great money saver for your family.

TPMS Diagnostic function (（purchased separately))

LAUNCH X431 PROS3+ can work with wireless tire pressure diagnostic tool (optional accessory) toachieve the features of TPMS activation, programming and learning.

a)Activation:to activate the sensor's IlD, wheel pressure, sensor frequency, tire temperature and battery status.

b)Programming:to program sensor data to a blank Thinkcar sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available:automatic, manual, and via activation replication.

c) Learning:to write the sensor ID into the vehicle ECU for sensor identification

ADAS calibration （purchased separately)

Advanced Driver Assistance System (ADAS) is an electronic component in a vehicle, including various safety functions of the vehicle, such as automatic emergency braking (AEB), lane departure warning (LDW),lane keeping assist, blind spot elimination, night vision camera and Adaptive lighting.

The function on the equipment is disabled by defa